HP EliteDesk 800 G6 Maintenance and Service Guide - Page 49
Fan with air duct (125 W processor
View all HP EliteDesk 800 G6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Before removing the air duct, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 19). 2. Remove the access panel (Access panel on page 19). Remove the air duct: 1. Pull the tabs on the sides of the duct away from each other (1). 2. Lift duct straight up and off the heat sink (2). To install the air duct, reverse the removal procedure. Fan with air duct (125 W processor) To remove the fan with air duct, use these procedures. Before removing the fan with air duct, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 19). 2. Remove the access panel (Access panel on page 19). Remove the fan with air duct: 1. Disconnect the fan cable from the system board (1). Fan with air duct (125 W processor) 39