HP Evo Notebook n200 Hardware Guide Evo Notebook N200 Series - Page 54
Using the Microphone Jack, Using the Stereo Speaker/Headphone Jack
View all HP Evo Notebook n200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Audio Using the Microphone Jack When connecting a microphone to the microphone jack, use a single sound channel (monaural) microphone with a 3.5-mm plug. A monaural electret condenser microphone is recommended. I If you connect a stereo microphone, left channel sound will record on both channels. I If you connect a dynamic microphone, the recommended sensitivity may not be achieved. When an external microphone is connected to the computer, the computer microphone is disabled. Using the Stereo Speaker/Headphone Jack Å WARNING: To reduce the risk of injury, adjust the volume before putting on headphones or a headset. Ä CAUTION: To prevent possible damage to an external device, do not plug a single-sound channel (monaural) connector into the stereo speaker/headphone (line-out) jack. When connecting a device to the stereo speaker/headphone (line-out) jack: I Use only a 3.5-mm stereo plug. I For best sound quality, use 24- to 32-ohm headphones. When an external audio device is connected to the stereo speaker/headphone (line-out) jack, the computer speaker is disabled. Hardware Guide 6-3