HP FAX-750 Service Manual - Page 135
WSW29, Start, TAD interprets those received voice signals as no signal
View all HP FAX-750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
Selector No. 1 | 3 4 | 6 7 8 WSW29 (Function setting 7) Function Compression threshold level for voice signals inputted via the telephone line in the built-in TAD operation Compression threshold level for voice signals inputted via the handset in the built-in TAD operation Automatic dialing by caller IDs stored in the memory Prompt beep for activity report Setting and Specifications No. 1 2 3 000 : 001 : 010 : 011 : 100 : 101 : 110 : 111 : No. 4 5 6 000 : 001 : 010 : 011 : 100 : 101 : 110 : 111 : -47.0 dBm (A) -48.5 dBm (B) -50.0 dBm (C) -51.5 dBm (D) -53.0 dBm (E) -54.5 dBm (F) -56.0 dBm (G) OFF (H) -44.0 dBm (A) -45.5 dBm (B) -47.0 dBm (C) -48.5 dBm (D) -50.0 dBm (E) -51.5 dBm (F) -53.0 dBm (G) OFF (H) 0: Yes 1: No 0: No 1: Yes NOTE: Selectors 1 through 6 are applicable to those models equipped with a built-in TAD. NOTE: Selector 8 is not applicable to the U.S.A. versions. l Selectors 1 through 6: Compression threshold level for voice signals inputted via the telephone line in the built-in TAD operation If voice signals inputted via the telephone line are below the level specified by these selectors, the TAD interprets those received voice signals as no signal, compressing the recording time. l Selector 7: Automatic dialing by caller IDs stored in the memory This selector determines whether or not the automatic dialing function by caller IDs stored in the memory (see the Note below) can be accessed. If it is set to "0," caller IDs stored in the memory can be called up on the LCD by the user function 67 and then pressing the Start key when the desired caller ID is displayed dials the caller automatically. (Note: The equipment can store a maximum of the latest 30 incoming caller IDs together with the reception date and time in the memory.) l Selector 8: Prompt beep for activity report This selector determines whether or not the equipment will beep if the activity report memory area becomes full with 30 records, for prompting you to print out the report. (Printing it out will clear the memory area.) V - 42