HP FAX-750 Service Manual - Page 155
Four-digit error codes listed above are preceded by MACHINE ERR instead of MACHINE, ERROR
View all HP FAX-750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
Error Code (Hex.) ( 82xx ( 8303 ( 8406 ( 8407 ( 840C ( 8809 ( 880A ( 880B ( A301 ( A302 ( A303 ( A304 ( A305 ( A306 ( A307 ( A308 Error factor Although recording paper has been fed by 150 mm after the start of recording, the paper-edge sensor is still OFF. ) Although recording paper has been fed by 360 mm after the start of recording, the paper-edge sensor is still ON. ) Although the trailing edge of recording paper has passed out of the platen and further fed for 100 mm, the paper ejection sensor is still ON. ) Within 10 mm of paper feeding from when the paper ejection sensor went OFF, the sensor has come ON again. The paper ejection sensor is ON when you turn the power on or after you open and close the recording paper cover. If the paper-edge sensor is also ON, error code 880B appears. Before the start of paper feeding, the paper-edge sensor is already ON. ) Although recording paper has been fed by 50 mm after the start of recording, the paper ejection sensor is still OFF. ) The paper-edge sensor is ON when you turn the power on or after you open and close the recording paper cover. If the paper ejection sensor is also ON, this error code appears. ) Even if a document is set, the document front sensor is OFF. ) Although a document has passed through the document front sensor, the document rear sensor is still OFF. ) When the document ejection operation has started, the document front sensor remains OFF. ) When the document ejection operation has started, the document rear sensor remains OFF. ) Although the CIS scanner area setting operation has been completed [Function code 55 in the maintenance mode], the document front sensor remains OFF. ) Although the CIS scanner area setting operation has been completed [Function code 55 in the maintenance mode], the document rear sensor remains OFF. ) In document scanning, the document rear sensor remains ON although the document has been fed by the specified amount after the document front sensor went OFF. ) In document ejecting caused by any of the following, the document rear sensor remains ON although the document has been fed by the specified amount after the document front sensor went OFF: - Depression of the STOP key in midway of scanning. - Illegal copying (Copying a document longer than the recording paper or making an enlargement copy larger than the recording paper). - Recovery operation from the error state (e.g., "DOCUMENT JAM" and "CHECK PAPER" error.) NOTE: Four-digit error codes listed above are preceded by MACHINE ERR instead of MACHINE ERROR. Error codes in parentheses do not appear in the "MACHINE ERR _ _ _ _," since those errors are displayed as messages described in "[ 1 ] Error messages on the LCD." You can display those error codes in the maintenance mode (Function code 82). If an equipment error occurs during communications, they appear in the communications error lists. VI - 4