HP FAX-750 Service Manual - Page 167
Error code displayed Refer to ERROR INDICATION, Beep code, In approx. 2-second cycle
View all HP FAX-750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
Trouble (7) Image distortion In communications At the scanner At the recorder Check: • Error code displayed (Refer to Section 1, "ERROR INDICATION" in this chapter.) • NCU PCB • Main PCB • Separation roller and its related sections • LF roller and its related gears • Solenoid and the planetary gear train • Drive motor and its harness • Main PCB • Compression springs beneath the recording head • Platen and its related gears • Solenoid and the planetary gear train • Drive motor and its harness • Main PCB [ 6 ] Others Trouble (1) When you turn the power ON, the beeper sounds. Check: • Main PCB TIP: The beeper sounds with one of the following three beep codes: Beep code Beep code 1 Beep code 2 Beep code 3 In approx. 2-second cycle of LHLHLHLHm HLHLLHLHm HLHLHLHLm Defective device RAM EEPROM Program ROM H: Beeps at 1.5 kHz for 0.1 second L: Beeps at 1.2 kHz for 0.1 second m: 0.5-second mute Between L and H, H and L, or L and L is a 0.1-second pause each. VI - 16