HP LaserJet 9000 HP LaserJet 9000 series printer User Guide - Page 109

Chapter 5 Problem solving 109 Message Explanation or recommended action INSTALL CARTRIDGE The print cartridge has been removed or has been installed incorrectly. It must be replaced or reinstalled correctly for printing to continue. INSTALL CONNECTION UNIT Connection unit is not installed in the right access door of the printer to allow printing from the optional input device. LOAD TRAY xx alternates with To use another tray press . A job is sent that requires a specific type and size that is not available. Load the requested paper into optional Tray 1. Press to use a type and size that is available in another tray. MANUALLY FEED [TYPE] [SIZE] alternates with To continue press Load the requested paper into optional Tray 1. To override the message, press if the desired paper is available in another tray. Press . to use a type and size that is available in another tray. MEMORY FULL STORED DATA LOST There is no available memory in the printer. The current job might not print correctly, and some resources (such as downloaded fonts) might have been deleted. You might want to add more memory to the printer (See "Printer memory and expansion" on page 197). MEMORY SETTINGS CHANGED Indicates the resource saving or I/O buffering settings were changed by the printer because it did not have enough memory to use the previous settings. This usually occurs after removing memory from the printer, adding a duplex printing accessory, or adding a printer language. You might want to change memory settings for I/O buffering and resource saving (although default settings are usually best), or add more memory to the printer (See "Printer memory and expansion" on page 197). Understanding printer messages