HP LaserJet 9000 HP LaserJet 9000 series printer User Guide - Page 128
skew, Curl or wave, Wrinkles or creases
View all HP LaserJet 9000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
Chapter 5 Problem solving 128 z Maintenance might be due. Check this by printing a copy of the supplies status page (see "Supplies status page" on page 156). If maintenance is due, order and install the printer maintenance kit. (See the introduce guide on the product CD, or go to www.hp.com/cposupport/.) Page skew z Print a few more pages to see if the problem corrects itself. z Verify that there are no torn pieces of paper inside the printer. z Make sure that paper is loaded correctly, all adjustments have been made, and the paper is under the corner tabs (see "Orienting media" on page 31). z Turn over the stack of paper in the tray. Also, try rotating the paper 180°. z Make sure that paper type and quality meet HP specifications (see "Specifications" on page 164). z Make sure that the environmental specifications for the printer are being met (see "Environmental product stewardship program" on page 218). Curl or wave z Turn over the stack of paper in the tray. Also, try rotating the paper 180°. z Make sure that paper type and quality meet HP specifications (see "Specifications" on page 164). z Make sure that the environmental specifications for the printer are being met (see "Environmental product stewardship program" on page 218). z Try printing to a different output bin. z If media is lightweight and smooth, try using a low fuser mode to reduce the heat in the fusing process. At the printer control panel, use CONFIGURE FUSER MODE MENU on the Paper handling menu to do this (see "Paper handling menu" on page 176). Wrinkles or creases z Print a few more pages to see if the problem corrects itself. z Make sure that the environmental specifications for the printer are being met (see "Environmental product stewardship program" on page 218). z Turn over the stack of paper in the tray. Also, try rotating the paper 180°. Correcting output quality problems