HP LaserJet 9000 HP LaserJet 9000 series printer User Guide - Page 110

Chapter 5 Problem solving 110 Message Explanation or recommended action MEMORY SHORTAGE JOB CLEARED alternates with READY The printer did not have enough free memory to print the entire job. The remainder of the job will not print and will be cleared from memory. Press to continue. Change the resource saving setting from the printer control panel (See "Control panel menus" on page 172) or add more memory to the printer (See "Printer memory and expansion" on page 197). MEMORY SHORTAGE PAGE SIMPLIFIED alternates with READY The printer had to compress the job in order to fit it in available memory. Some data loss might have occurred. Press to continue. The print quality of these pages might not be acceptable. Reduce the complexity of these pages and reprint them. You might want to add more memory to the printer (See "Printer memory and expansion" on page 197). NO JOB TO CANCEL The CANCEL JOB key was pressed, but there is no active job or buffered data to cancel. NON-HP CARTRIDGE DETECTED Message is displayed for approximately two seconds before the printer is returned to the READY state. The printer has detected that the cartridge is not a genuine HP cartridge, and the message is displayed for approximately 30 seconds before the printer is returned to the READY state. If you think you purchased an HP print cartridge, call the HP fraud hotline (1-877-219-3183, toll-free in North America). Any printer repair required as a result of using a non-HP print cartridge is not covered under the printer warranty. Understanding printer messages