HP LaserJet 9000 HP LaserJet 9000 series printer User Guide - Page 184

Appendix B Control panel menus 184 Print quality submenu Some items in this menu are accessible from a software application, or from the printer driver (if the appropriate driver is installed). Printer driver and software application settings override control panel settings. For more information, see "Using features in the printer driver" on page 51. Item SET REGISTRATION Values RESOLUTION= FASTRES 1200 300 600 FASTRES 1200 RET=MEDIUM OFF LIGHT MEDIUM DARK Explanation Shift the margin alignment to center the image on the page from top to bottom, and left to right. You can also align the image on the front, with the image printed on the back. Select the resolution from the values listed below: 300: Produces draft print quality at maximum printer speed (50 ppm). 300 dpi (dots per inch) is recommended for some bitmapped fonts and graphics, and for compatibility with the HP LaserJet III family of printers. 600: Produces high print quality at maximum printer speed (50 ppm). FASTRES 1200: Produces optimum print quality (comparable to 1,200 dpi) at maximum printer speed (50 ppm). Note It is best to change the resolution from the printer driver or software application. (Driver and software settings override control panel settings.) Use printer Resolution Enhancement technology (REt) setting to produce print with smooth angles, curves, and edges. All print resolutions, including FastRes 1,200, benefit from REt. Note It is best to change the REt setting from the printer driver or software application. (Driver and software settings override control panel settings.) Configure device menu