HP LaserJet 9000 HP LaserJet 9000 series printer User Guide - Page 177

Appendix B Control panel menus Item FUSER MODES Values AUTO NORMAL LOW HIGH1 HIGH2 SPECIAL 177 Explanation Configure the fuser mode associated with each paper type. The fuser mode can only be changed from this menu option in the control panel. AUTO: Utilizes the optimum mode for that media type. NORMAL: Normal temperature, prints at 50 pages per minute (ppm). LOW: Low temperature, prints at 50 ppm. HIGH1: Raises the temperature, prints at 50 ppm. HIGH2: Raises the temperature, prints at 32 ppm. SPECIAL: Mode to print at normal speeds with a 40-second delay added to the beginning of the next job. After each 400 pages are printed, the first page of that job is printed at a slower speed in order to clean the fuser. No defects should be noticeable on the printed page. This is not a preferred setting. The default value for each paper type is AUTO. For a complete list of supported paper types, see the introduce guide on the product CD, or go to www.hp.com/cposupport/. CAUTION If you change the fuser mode to HIGH1 or HIGH2, be sure to change it back to the default when you are done printing. Setting a paper type to HIGH1 or HIGH2 might shorten the life of some consumables, such as the fuser, and might cause other failures or jams. Paper handling menu