HP LaserJet 9000 HP LaserJet 9000 series printer User Guide - Page 185

Appendix B Control panel menus 185 Item Values Explanation ECONOMODE=OFF OFF ON Turn EconoMode on (to save toner) or off (for high quality). EconoMode is designed to give print output at a very low cost. EconoMode will work only with genuine HP print cartridges. Note It is best to turn EconoMode on or off from the control panel (Control panel settings override driver and software settings). TONER DENSITY=3 1 to 5 Lighten or darken the print on the page by changing the toner density setting. The settings range from 1 (light) to 5 (dark), but the default setting of 3 usually produces the best results. Note It is best to change the toner density from the printer driver or software application. (Driver and software settings override control panel settings.) SMALL PAPER MODE No value to select. When printing narrow media the part of the fuser rollers that do not make contact with the media swell up and can cause wrinkles. CREATE CLEANING PAGE No value to select. Press path). to print a cleaning page (for cleaning excess toner from the paper In order for the cleaning page to work properly, print the page on copier grade paper (not bond or rough paper). Follow the instructions on the cleaning page. The progress bar shows how long before the process is complete. PROCESS CLEANING PAGE No value to select. This item appears only after a cleaning page has been generated (as described above). Press to process the cleaning page. The progress bar shows how long until the process is complete. Configure device menu