HP LaserJet P4510 Service Manual - Page 303
X STORAGE ERROR SETTINGS, CHANGED, To continue press OK, X ERROR, For help press, XXXX ERROR,
View all HP LaserJet P4510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 303 highlights
Table 7-9 Control-panel messages (continued) Control panel message Description alternates with 68.X STORAGE ERROR SETTINGS CHANGED To continue press OK 69.X ERROR For help press alternates with 69.X ERROR To continue press OK 79.XXXX ERROR To continue turn off then on A printing error occurred. The product detected a critical hardware error. Recommended action Print a configuration page and check the product settings to determine which values have changed. If the error does not clear, turn the product off and then on. If the message persists, contact an HP-authorized service or support provider. ● Turn the product off and then on. ● If the message persists, contact an HPauthorized service or support provider. ● Press the stop button to clear the print job from the product memory. Turn the product off and then on. ● Try printing a job from a different program. If the job prints, go back to the first program and try printing a different file. If the message appears only with a certain program or print job, contact the software vendor for assistance. If the message persists with different programs and print jobs, try these steps. ● Turn the product off. ● Disconnect all cables to the product that connect it to the network or computer. ● Remove all the memory DIMMs or thirdparty DIMMs from the product. Then reinstall the memory DIMM. ● Remove the EIO device from the product. ● Turn the product on. If the error no longer exists, follow these steps. ● Install the DIMM and EIO device one at a time, making sure to turn the product off and then on as you install each device. ● Replace the DIMM or EIO device if you determine that it causes the error. ● Reconnect all cables that connect the product to the network or computer. ENWW Control-panel messages 289