HP LaserJet P4510 Service Manual - Page 339
Output is curled or wrinkled, Cause, Solution
View all HP LaserJet P4510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 339 highlights
Output is curled or wrinkled Output is curled or wrinkled Cause Solution Paper does not meet the specifications for this product. Use only paper that meets the HP paper specifications for this product. Paper is damaged or in poor condition. Product is operating in an excessively humid environment. You are printing large, solid-filled areas. Remove paper from the input tray and load paper that is in good condition. Verify that the printing environment is within humidity specifications. Large, solid-filled areas can cause excessive curl. Try using a different pattern. Paper used was not stored correctly and might have absorbed Remove paper and replace it with paper from a fresh, moisture. unopened package. Paper has poorly cut edges. Remove paper, flex it, rotate it 180 degrees or turn it over, and then reload it into the input tray. Do not fan paper. If the problem persists, replace the paper. The specific paper type was not configured for the tray or selected in the software. Configure the software for the paper (see the software documentation). Configure the tray for the paper, see Load trays on page 54. The paper has previously been used for a print job. Do not re-use paper. ENWW Paper-handling problems 325