HP Model 712/100 hp 9000 series 700 model 712 service handbook (a2615-90039) - Page 54
Memory
View all HP Model 712/100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Memory The system has two pairs of memory connectors, labeled Slot 0 and Slot 1 for Pair 0, and Slot 2 and Slot 3 for Pair 1, as shown in Figure 3-13. The model 712/100 has a third pair of connectors labeled Slot 4 and Slot 5, as shown in Figure 3-14. Install memory boards according to the following guidelines: D Install memory boards in pairs of the same memory capacity. D Board Pair 0 may have a different memory capacity than Board Pair 1. For example, if the Pair 0 has 16-MB memory boards, Pair 1 may have 4-MB memory boards. Always put the largest capacity memory boards in the lowest numbered slots. D Install the first pair of memory boards in the connectors labeled 0 and 1 (Pair 0) and the second pair, which is optional, in the connectors labeled 2 and 3 (Pair 1). In the 712/100 add the third pair in the connectors labeled 4 and 5 (Pair 2). Back of System Unit 01 23 Pair 0 Pair 1 Figure 3-13. Memory Connectors 3-14 Configuration