HP PSC 1350/1340 HP PSC 1300 series All-in-One - (English) Reference Guide - Page 71
scan picture, scan document, and hp gallery, If the essential icons do not appear
View all HP PSC 1350/1340 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
problem A red X or yellow triangle appears on the USB connect prompt possible cause and solution troubleshooting information do the following 1 Verify that the front panel cover is firmly adhered to the device, then unplug the HP PSC and plug it in again. For more information on how to attach the front panel cover, see I received a message to attach the front panel cover on page 68. 2 Verify that the USB and power cables are plugged in. 3 Verify that the USB cable is set up properly as follows: - Unplug the USB cable and plug it in again. - Do not attach the USB cable to a keyboard or non powered hub. - Verify that the USB cable is 3 meters or less in length. - If you have several USB devices attached to your computer, you might want to unplug the other devices during the installation. 4 Continue with the installation and reboot the computer when prompted. Then open HP Director and check for the essential icons (scan picture, scan document, and hp gallery) If the essential icons do not appear, remove the software and then reinstall it as described in Some of the icons are missing in the hp director on page 66. I received a message Try to continue with the installation. If that doesn't work, stop and then that an unknown error restart the installation. has occurred reference guide 65