HP Photosmart 8400 HP Photosmart 8400 series User's Guide - Page 56
after it has been sitting unused for a while.
View all HP Photosmart 8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Chapter 7 The On light flashed amber briefly after I turned the printer off. This is a normal part of the power-down process. It does not indicate a problem with the printer. The On light is flashing amber. A printer error has occurred. Try the following: ● Check the printer screen for instructions. If you have a digital camera connected to the printer, check the camera screen for instructions. If the printer is connected to a computer, check the computer monitor for instructions. ● Turn off the printer, then unplug its power cord. Wait about 10 seconds, then plug it in again. Turn on the printer. ● If the On light continues to flash amber, go to www.hp.com/support or contact Customer Care. The printer does not find and display the photos I stored on my memory card. Try the following: ● Turn off the printer, then unplug its power cord. Wait about 10 seconds, then plug it in again. Turn on the printer. ● The memory card may contain file types the printer cannot read directly from the memory card. - Save the photos to a computer, then print them from the computer. For more information, see the documentation that came with the camera and the onscreen HP Photosmart Printer Help. - The next time you take photos, set the digital camera to save them in a file format the printer can read directly from the memory card. For a list of supported file formats, see Printer specifications. For instructions on setting the digital camera to save photos in specific file formats, see the documentation that came with the camera. - The memory card may need to be reformatted if the problem persists. The printer is plugged in, but it will not turn on. ● The printer may have drawn too much power. Unplug the printer's power cord. Wait about 10 seconds, then plug the power cord back in. Turn on the printer. ● The printer may be plugged into a power strip that is turned off. Turn on the power strip, then turn on the printer. ● The power cord could be defective. Check the green light on the power cord and make sure it is lit. The printer makes noises when I turn it on, or starts making noises on its own after it has been sitting unused for a while. The printer may make noises after long periods of inactivity (approximately 2 weeks), or when its power supply has been interrupted and then restored. This is normal 52 HP Photosmart 8400 series