HP StorageWorks 2/64 HP StorageWorks Core Switch 2/64 Getting Started & Ge - Page 10
The Port Side of the Chassis, Compaq/Rittal rack. The HP StorageWorks Core Switch 2/64 includes
![]() |
View all HP StorageWorks 2/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
devices connected to the port. They are compatible with short wave-length and long wave-length SFP (small form factor pluggable) transceivers, universal and self-configuring, and capable of individually becoming FL_Ports (fabric loop ports), F_Ports (fabric ports), or E_Ports (expansion ports). The HP StorageWorks Core Switch 2/64 is 14 rack units in height, has an air-cooled chassis, and can be installed in either an HP Rosebowl II or Compaq/Rittal rack. The HP StorageWorks Core Switch 2/64 includes the following features: • Fabric OS 4.0 or later • Web Tools • Zoning • Fabric Watch • Advanced Performance Monitoring • ISL Trunking (License required) • Remote Switch (License required) • Extended Fabrics (License required) The Port Side of the Chassis Figure 1 shows the port side of the HP StorageWorks Core Switch 2/64 chassis, which allows access to the following system components: • The 16-port cards (two to eight cards per chassis, as ordered), with each card containing sixteen fibre channel SFP ports. • Two CP cards, each with a modem serial port, terminal serial port, and 10/100 Mbps ethernet port. • Four power supplies that are hot-swappable and have built-in fans. • Two AC power connectors, each with an on/off AC power switch. For operating information for the components, refer to Chapter 4, "Operating the Switch" on page 45. 2 getting started and general reference guide
![](/manual_guide/products/hewlettpackard-storageworks-264-hp-storageworks-core-switch-264-getting-started-general-reference-guide-4e71e98/10.png)