HP StorageWorks 2/64 HP StorageWorks Core Switch 2/64 Getting Started & Ge - Page 36
For an HP Rosebowl II rack, use M5, Steps 13
View all HP StorageWorks 2/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Rear of Rack 14.From the rear side of the rack, install screws into the second and bottom positions on the right front mounting bracket through the Tinnerman nuts installed earlier (see Figure 18). For an HP Rosebowl II rack, use M5 Torx head screws with captive lock washers. For a Compaq/Rittal rack, use #10-32 x .63" Phillips pan-head screws with integrated lock washers. Do not tighten the screws. Front of Rack HP Rosebowl II Rack: M5 Torx Head Screws with Captive Lock Washers (2x) Or Compaq/Rittal Rack: #10-32 Phillips Pan-Head Screws with Integrated Lock Washers (2x) Second and Bottom Positions of the Right Front Mounting Bracket Figure 18. Securing the Switch to the Right Front Mounting Bracket 15.Tighten the screws installed in Steps 13-14. Note If you find that you cannot tighten all the screws, you may be having an alignment problem. Loosen all the screws, align the switch with the rack by carefully leveraging the switch with a screwdriver, and retighten all the screws. 28 getting started and general reference guide