HP StorageWorks 2/64 HP StorageWorks Core Switch 2/64 Getting Started & Ge - Page 68
Second LED, Check for out-of-bounds
![]() |
View all HP StorageWorks 2/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Table 6. Control Processor Card LED Patterns Location of LED Purpose of LED Color of LED Status of Hardware Recommended Action Top LED Power No light CP card does not have (LED is off) incoming power. Ensure CP card is firmly seated and has power. Steady green CP card has incoming power. No action required. Second LED Status ! No light (LED is off) CP card is either healthy or Verify that Power LED is does not have incoming lit. power. Steady yellow CP card is faulty. Ensure CP card is firmly seated. If LED is still yellow, consult HP support. Slow-flashing yellow: on 2 second; off 2 second CP card is not seated correctly or is faulty. Pull unit out and reseat. If LED continues to flash, replace unit. Fast-flashing Environmental range yellow: exceeded. on 1/2 second; off 1/2 second Check for out-of-bounds environmental condition. Link LED Link Status and Activity No light (LED is off). Either CP card does not Ensure CP card has power, have incoming power or no and verify Ethernet cable is link is detected. firmly seated and device at other end of link is functioning. Flashing yellow Link is healthy with traffic No action required. flowing through port. 10/100 Mb/s Link LED Speed No light Either link speed is 10 Mb/s Ensure CP card has power. (LED is off). or CP card does not have incoming power. Steady green Link speed is 100 Mb/s. No action required. 60 getting started and general reference guide
![](/manual_guide/products/hewlettpackard-storageworks-264-hp-storageworks-core-switch-264-getting-started-general-reference-guide-4e71e98/68.png)