HP StorageWorks 2/64 HP StorageWorks Core Switch 2/64 Getting Started & Ge - Page 21

Hardware Identification, Installing the Switch in a Rack

Get HP StorageWorks 2/64 - Core Switch PDF manuals and user guides View all HP StorageWorks 2/64 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

Hardware Identification Table 2 contains drawings and descriptions of the hardware used when installing the HP StorageWorks Core Switch 2/64 in an HP Rosebowl II or Compaq/Rittal rack. Use this table to help identify the hardware specified in the installation procedure in this chapter. Note Depending on the rack you use, you may not be using all of the hardware listed below. Table 2. Hardware Key #10-32 x .63" Phillips pan-head screws with integrated lock washers (4) 1/4-20 x .5" Phillips pan-head screws (16) 1/4-20 x .5" Phillips pan-head screws with integrated lock washers (16) #10-32 x 1/4" flat-head screws (8) #8-32 x 1/4" flat-head screws (8) .375" square mounting holes (16) #10-32 square Tinnerman nuts (4) M5 Torx head screws with captive lock washers (4) M5 U-type Tinnerman nuts (4) Installing the Switch in a Rack Figure 4 shows the switch already installed in a rack. The rest of this section provides instructions for installing the HP StorageWorks Core Switch 2/64 in an HP Rosebowl II or Compaq/Rittal rack. Installing the Switch 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
Installing the Switch
13
Hardware Identification
Table 2
contains drawings and descriptions of the hardware used when
installing the HP StorageWorks Core Switch 2/64 in an HP Rosebowl II or
Compaq/Rittal rack. Use this table to help identify the hardware specified
in the installation procedure in this chapter.
Note
Depending on the rack you use, you may not be using all of the
hardware listed below.
Installing the Switch in a Rack
Figure 4
shows the switch already installed in a rack. The rest of this
section provides instructions for installing the HP StorageWorks Core
Switch 2/64 in an HP Rosebowl II or Compaq/Rittal rack.
Table 2.
Hardware Key
#10-32 x .63” Phillips pan-head screws with integrated lock
washers (4)
1/4-20 x .5” Phillips pan-head screws (16)
1/4-20 x .5” Phillips pan-head screws with integrated lock
washers (16)
#10-32 x 1/4” flat-head screws (8)
#8-32 x 1/4” flat-head screws (8)
.375” square mounting holes (16)
#10-32 square Tinnerman nuts (4)
M5 Torx head screws with captive lock washers (4)
M5 U-type Tinnerman nuts (4)