HP StorageWorks 2/64 HP StorageWorks Core Switch 2/64 Getting Started & Ge - Page 29

For an HP Rosebowl II rack, use, rear of the rack see

Get HP StorageWorks 2/64 - Core Switch PDF manuals and user guides View all HP StorageWorks 2/64 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

e. Install each rail assembly to the inside of the rack columns with six screws per rail assembly, two on the front of the rack and four on the rear of the rack (see Figure 11). For an HP Rosebowl II rack, use 1/4-20 x .5" Phillips pan-head screws. For a Compaq/Rittal rack, use 1/4-20 x .5" Phillips pan-head screws with a .375" square mounting hole between the screw and the rack column. Front of Rack 1/4-20 Phillips Pan-Head Screws (6x set) Adjusting Screws 1/4-20 Phillips Pan-Head Screws (6x set) Rail Assemblies (2x) Rear of Rack HP Rosebowl II Rack .375" Square Mounting Hole (6x set) Compaq/Rittal Rack Figure 11. Installing the Rail Assembly f. Tighten each of the adjusting screws loosened earlier. Installing the Switch 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
Installing the Switch
21
e.
Install each rail assembly to the inside of the rack columns with six
screws per rail assembly, two on the front of the rack and four on the
rear of the rack (see
Figure 11
). For an HP Rosebowl II rack, use
1/4-20 x .5” Phillips pan-head screws. For a Compaq/Rittal rack, use
1/4-20 x .5” Phillips pan-head screws with a .375” square mounting
hole between the screw and the rack column.
Figure 11.
Installing the Rail Assembly
f.
Tighten each of the adjusting screws loosened earlier.
Compaq/Rittal
Rack
1/4-20 Phillips
.375” Square
Rail Assemblies (2x)
Adjusting Screws
1/4-20 Phillips
Pan-Head
Screws (6x set)
HP Rosebowl II Rack
Pan-Head
Screws (6x set)
Mounting Hole
(6x set)
Rear of Rack
Front of Rack