HP StorageWorks 2/64 HP StorageWorks Core Switch 2/64 Getting Started & Ge - Page 87
Post Specifications, The HP StorageWorks Core Switch 2/64 performs POST by default each
![]() |
View all HP StorageWorks 2/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Post Specifications The HP StorageWorks Core Switch 2/64 performs POST by default each time the chassis is powered on (cold boot) or the switch is rebooted. The switch can be rebooted using the switchreboot, reboot, or fastboot commands. The fastboot command reboots the switches without running POST. A CP card failover event results in a reboot for the affected CP card. POST includes a number of diagnostic tests. Test results can be monitored through LED activity, the error log, or command-line interface. POST requires a minimum of three minutes to complete and may vary depending on the devices connected to the switch. POST includes the following steps: 1. Preliminary POST diagnostics are run. 2. Operating system is initialized. 3. Hardware is initialized. 4. Diagnostic tests are run on a number of functions, including internal connections and circuitry, port functionality, ability to send and receive frames, all aspects of memory, parity, statistics counters, and correct serialization. The following switch initialization steps are performed whether or not POST is run: 1. Universal Port configuration is performed. 2. Links are initialized. 3. Fabric is analyzed. If ports are connected to other fabric elements (switches), the switch will participate in a fabric configuration. 4. The switch will obtain a domain ID and assign port addresses. 5. Unicast routing tables are constructed. 6. Normal port operation is enabled. Full initialization takes a minimum of 5 minutes. Specifications 79
![](/manual_guide/products/hewlettpackard-storageworks-264-hp-storageworks-core-switch-264-getting-started-general-reference-guide-4e71e98/87.png)