HP StorageWorks 2/64 HP StorageWorks Core Switch 2/64 Getting Started & Ge - Page 85

Terminal Serial Port Specifications, Receive Data

Get HP StorageWorks 2/64 - Core Switch PDF manuals and user guides View all HP StorageWorks 2/64 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 85 highlights

WARNING There is danger of explosion if the battery is incorrectly replaced. All used batteries must be discarded according to the manufacturer's instructions. Contact HP support if the real time clock begins to lose time. Terminal Serial Port Specifications Each CP card provides a terminal serial port with a DB-9 connector with an RS-232 signal subset (see Figure 21 on page 59). Note For dust and ESD protection, a cover is provided for the serial port and should be kept on the port whenever the serial port is not in use. The terminal serial port can be used to connect to a computer workstation or terminal without connecting to the fabric. The terminal device should be configured to 9600 baud, 8 data bits, no parity, 1 stop bit, with no flow control. The terminal serial port requires a straight through serial cable with a female 9-pin D-SUB connector. Use the pin outs listed in the following table. Table 16. Terminal Serial Port Pin Out PIN Signal Description 1 2 TxData Transmit Data 3 RxData Receive Data 4 5 GND Logic Ground 6 7 8 9 Specifications 77

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
Specifications
77
WARNING
There is danger of explosion if the battery is incorrectly
replaced. All used batteries must be discarded according to the
manufacturer’s instructions. Contact HP support if the real time clock
begins to lose time.
Terminal Serial Port Specifications
Each CP card provides a terminal serial port with a DB-9 connector with an
RS-232 signal subset (see
Figure 21
on
page 59
).
Note
For dust and ESD protection, a cover is provided for the serial port
and should be kept on the port whenever the serial port is not in use.
The terminal serial port can be used to connect to a computer workstation
or terminal without connecting to the fabric. The terminal device should be
configured to 9600 baud, 8 data bits, no parity, 1 stop bit, with no flow
control.
The terminal serial port requires a straight through serial cable with a
female 9-pin D-SUB connector. Use the pin outs listed in the following
table.
Table 16.
Terminal Serial Port Pin Out
PIN
Signal
Description
1
2
TxData
Transmit Data
3
RxData
Receive Data
4
5
GND
Logic Ground
6
7
8
9