HP StorageWorks 2/64 HP StorageWorks Core Switch 2/64 Getting Started & Ge - Page 44
Enter, CTRL+C, include a combination of numbers and upper case and lower case letters.
![]() |
View all HP StorageWorks 2/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
- For most UNIX systems, enter the following string at the prompt: tip /dev/ttyb -9600 e. When the terminal emulator application stops reporting information, press Enter to get the following login prompt: CP0 Console Login: f. Enter the administrative login information. The default administrative login is admin and the default password is password. Note At the initial login, the user is prompted to enter new Admin and User passwords. The same administrative account applies to both logical switches and both CP cards. If the password is changed on a logical switch or CP card, it is automatically changed for both logical switches and both CP cards. Note Passwords must be a total of 8 to 40 characters long, and should include a combination of numbers and upper case and lower case letters. To skip modifying the password, press CTRL+C. g. Enter "0" at the following prompt to log in to switch 0: Enter switch number to login : 0 3. Enter the following command to determine which CP card is active: haShow This command provides information: switch:admin> haShow Local CP (Slot 5, CP0): Active Remote CP (Slot 6, CP1): Standby HA Enabled, Heartbeat Up For more information about this command, refer to the hp StorageWorks fabric os reference. 4. Configure the IP address information for both CP cards by completing the following steps: 36 getting started and general reference guide
![](/manual_guide/products/hewlettpackard-storageworks-264-hp-storageworks-core-switch-264-getting-started-general-reference-guide-4e71e98/44.png)