HP StorageWorks 2/64 HP StorageWorks Core Switch 2/64 Getting Started & Ge - Page 65
Verify that Power LED is, off 1/4 second
![]() |
View all HP StorageWorks 2/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Table 5. 16-Port Card LED Patterns Location of LED Purpose of LED Color of LED Status of Hardware Recommended Action Left of each port, lower LED Port Status and Activity No light (LED is off) Either the 16-port card does Verify that Power LED is not have incoming power or lit, and check transceiver there is no light or signal and cable. carrier detected. Steady green Port is online (connected to No action required. an external device) but has no traffic. Slow-flashing green: on 1 second; off 1 second Port is online but segmented, indicating a loop back cable or an incompatible switch. Verify correct device is connected to port. Fast-flashing Port is in internal loop back No action required. green: (diagnostic). on 1/4 second; off 1/4 second Flickering green Port is online, with traffic No action required. flowing through port. Steady yellow Port is receiving light or No action required. signal carrier, but is not yet online. Slow-flashing yellow: on 2 seconds; off 2 seconds Port is disabled (diagnostic tests or portDisable command). Reset port from workstation. Fast-flashing Transceiver or port is faulty. Change transceiver or reset yellow: switch from workstation. on 1/2 second; off 1/2 second Alternating green and yellow Port is bypassed. Reset port from workstation. Operating the Switch 57
![](/manual_guide/products/hewlettpackard-storageworks-264-hp-storageworks-core-switch-264-getting-started-general-reference-guide-4e71e98/65.png)