HP StorageWorks 2/64 HP StorageWorks Core Switch 2/64 Getting Started & Ge - Page 52
Setting Up Speed Negotiation, Depending on your environment you may need to force a port to use
![]() |
View all HP StorageWorks 2/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Setting Up Speed Negotiation There are two methods for configuring the ports on the HP StorageWorks Core Switch 2/64. The port can be set to auto-sensing mode, which allows the port to automatically be configured to the highest speed. Ports can also be set to a fixed speed of either 1 or 2 Gbps. To display the configuration settings of the ports on a switch, use the portCfgShow. The port speed is displayed as 1G (fixed speed of 1 Gbps), 2G (fixed speed of 2 Gbps), or AN (auto-negotiate). To set the speed level for all the ports on a switch, use the telnet command switchCfgSpeed. To set the speed level for a single port, use the portCfgSpeed. Depending on your environment you may need to force a port to use a specific speed level. Auto negotiation may not be supported by the device. Check the configuration information for your network components for specific requirements. See the hp StorageWorks fabric os reference for a detailed command description. 44 getting started and general reference guide
![](/manual_guide/products/hewlettpackard-storageworks-264-hp-storageworks-core-switch-264-getting-started-general-reference-guide-4e71e98/52.png)