HP StorageWorks 2/64 HP StorageWorks Core Switch 2/64 Getting Started & Ge - Page 51
Restoring the System Configuration Settings, the configuration file
![]() |
View all HP StorageWorks 2/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
location and filename of the configuration file, and password is the password for the user ID specified. If only configUpload is entered the system prompts you for each parameter. Example: switch:admin> configupload Server Name or IP Address [host]: 123.45.678.901 User Name [user]: kelev File Name [config.txt]: switch1 Protocol (RSHD or FTP) [rshd]: ftp Password: upload complete Restoring the System Configuration Settings To restore the system configuration settings from a backup: 1. Verify that the FTP service is running on the host workstation. 2. Log in to the switch as the admin user. 3. Shut down the switch by entering the following command: switchDisable 4. At the command line enter the following command: configDownload "hostIPaddr", "user", "path_filename","password" where hostIPaddr is the IP address of the host computer containing the configuration file, user is the User ID used to log into this computer, path_filename is the path location and filename of the system configuration file, and password is the password for the user ID specified. Note The password operand is only required if you are using FTP. 5. Reboot the switch by entering the following command: fastBoot Starting and Configuring the Switch 43
![](/manual_guide/products/hewlettpackard-storageworks-264-hp-storageworks-core-switch-264-getting-started-general-reference-guide-4e71e98/51.png)