HP StorageWorks MSA1000 HP StorageWorks 2/8q Fibre Channel Switch Management V - Page 117
Admin command, Set Setup System, Hardreset, Logout, Shutdown, Reset, Switch, Admin Cancel
View all HP StorageWorks MSA1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Command Line Interface Table 44: Commands listed by Authority Level (Continued) Monitoring commands Whoami command page 173 Administrative commands Reset command page 131 Set command page 135 Set Config command page 137 Set Log Command page 144 Set Port command page 146 Set Setup command page 147 Shutdown command page 169 Test command page 169 User command page 171 Zone Command page 174 Zoneset command page 176 Admin command Opens and closes an Admin session. The Admin session provides commands that change the fabric and switch configurations. Only one Admin session can be open on the switch at any time. An inactive Admin session times out after a period of time which can be changed using the Set Setup System command. See the "Set Setup command" on page 147. Authority Admin Syntax ADMIN Keywords START Opens the admin session. END Closes the admin session. The Hardreset, Logout, Shutdown, and Reset Switch commands also end an admin session. CANCEL Terminates an Admin session opened by another user. Use this keyword with care because it terminates the Admin session without warning the other user and without saving pending changes. Notes Closing a Telnet window during an admin session does not release the session. In this case, you must either wait for the admin session to time out, or use the Admin Cancel command. HP StorageWorks 2/8q Fibre Channel Switch Management User Guide 117