HP StorageWorks MSA1000 HP StorageWorks 2/8q Fibre Channel Switch Management V - Page 135
Set command, Disables the display of alarms in the session output stream.
View all HP StorageWorks MSA1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
Command Line Interface Table 49: SNMP configuration default settings (Continued) Parameter Object ID AuthFailureTrap ProxyEnabled Default setting 1.3.6.1.4.1.1663.1.1.1.1.31 False True Table 50: System configuration default settings Parameter Ethernet Network Discovery Ethernet Network IP Address Ethernet Network IP Mask Ethernet Gateway Address Admin Timeout LocalLogEnabled RemotelogEnabled RemoteLogHostAddress NTPClientEnabled NTPServerAddress Static 10.0.0.1 255.0.0.0 10.0.0.254 30 minutes True False 10.0.0.254 False 10.0.0.254 Default setting Set command Sets a variety of switch parameters. Authority Admin for all keywords except Alarm, Beacon, and Pagebreak. Syntax SET Keywords ALARM [option] Controls the display of alarms in the session output stream or clears the alarm log. [option] can be one of the following: CLEAR-Clears the alarm log history. This value requires an Admin session. ON-Enables the display of alarms in the session output stream. OFF-Disables the display of alarms in the session output stream. BEACON [state] Enables or disables the flashing of the Logged-In LEDs according to [state]. This keyword does not require an admin session. [state] can be one of the following: ON-Enables the flashing beacon. OFF-Disables the flashing beacon. HP StorageWorks 2/8q Fibre Channel Switch Management User Guide 135