HP StorageWorks MSA1000 HP StorageWorks 2/8q Fibre Channel Switch Management V - Page 77
Restoring the factory default configuration, Switch > Restore Factory Defaults
View all HP StorageWorks MSA1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Switch Manager Restoring the factory default configuration You can restore the switch and port configuration settings to the factory default values. To restore the factory configuration on a switch, select Switch > Restore Factory Defaults. Table 18 lists the factory default switch configuration settings. Restoring the switch to the factory default configuration does not restore the account name and password settings. To restore user accounts, select Maintenance > Reset Password File. Refer to "Recovering a Switch" in the Installation Guide for your switch for information about maintenance mode and the Maintenance menu. Table 18: Factory default configuration settings Setting Symbolic Name Administrative State Domain ID Domain ID Lock In-band Management Broadcast Support Resource Allocation Timeout (R_A_TOV) Interop Mode I/O Stream Guard Device Scan Enabled Interop Credits Error Detect Timeout (E_D_TOV) SNMP Enabled SNMP Proxy IP Address Subnet Mask Address Gateway Address Network Discovery Remote Logging Remote Logging Host Ip Address Contact Location Trap Enabled Trap Port Trap Address Trap Community Read Community Write Community Port State Port Speed Port Type Value 2/8q FC Switch Online 1 False True Enable 10000 milliseconds True (not supported) Disabled True 0 (not supported) 2000 milliseconds True True 10.0.0.1 255.0.0.0 10.0.0.254 Static False 10.0.0.254 Undefined Undefined False 162 Trap 1: 10.0.0.254; Traps 2-5: 0.0.0.0 Public Public Private Online Auto-detect GL HP StorageWorks 2/8q Fibre Channel Switch Management User Guide 77