HP StorageWorks MSA1000 HP StorageWorks 2/8q Fibre Channel Switch Management V - Page 136
Alias List, Members, Show Alarm, Log, Zone List, Zones, Zoning, Active, List, ONLINE, DIAGNOSTICS
View all HP StorageWorks MSA1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
Command Line Interface CONFIG [option] Sets switch, port, port threshold alarm, and zoning configuration parameters. See the "Set Config command" on page 137. LOG [option] Specifies the type of entries to be entered in the event log. See the "Set Log Command" on page 144. PAGEBREAK [state] Specifies how much information is displayed on the screen at a time according to the value given by [state]. This keyword does not require an admin session. [state] can be one of the following: ON-Limits the display of information to 20 lines at a time. The page break functions affects the following commands: Alias (List, Members), Show (Alarm, Log), Zone (List, Members), Zoneset (List, Zones), Zoning (Active, List). OFF-Allows continuous display of information without a break. PORT [option] Sets port state and speed for the specified port. The previous Set Config Port settings are restored after a switch reset or a reactivation of a switch configuration. See the "Set Port command" on page 146. SETUP [option] Changes SNMP and system configuration settings. See the "Set Setup command" on page 147. SWITCH [state] Changes the administrative state for all ports on the switch to the state given by [state]. The previous Set Config Switch settings are restored after a switch reset or a reactivation of a switch configuration. [state] can be one of the following: ONLINE-Places all ports online OFFLINE-Places all ports offline. DIAGNOSTICS-Prepares all ports for testing. Examples 2/8q FC Switch #> set beacon on 2/8q FC Switch $> set beacon off 136 HP StorageWorks 2/8q Fibre Channel Switch Management User Guide