HP StorageWorks MSA1000 HP StorageWorks 2/8q Fibre Channel Switch Management V - Page 123
Date command, Firmware Install command, MMDDhhmmCCYY
View all HP StorageWorks MSA1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Command Line Interface Remote system type is UNIX. Using binary mode to transfer files. 221-You have transferred 43430 bytes in 1 files. 221-Total traffic for this session was 43888 bytes in 1 transfers. 221 Thank you for using the FTP service on localhost.localdomain. FTP the dump support file to another machine? (y/n): n Date command This command displays or sets the system date and time. To set the date and time the information string must be provided in this format: MMDDhhmmCCYY. The new date and time takes effect immediately. Authority Admin session, except to display the date. Syntax DATE Keywords [MMDDhhmmCCYY] Specifies the date-this requires an admin session. If you omit [MMDDhhmmCCYY], the current date is displayed, which does not require an admin session. Examples 2/8q FC Switch #> date Mon Apr 07 07:51:24 2003 Firmware Install command Downloads firmware from a remote host to the switch, installs the firmware, and then resets the switch (without a power-on self test) to activate the firmware. If possible, a non-disruptive firmware activation is performed. The command prompts you for the IP address of the remote host, an account name and password on the remote host, and a pathname for the firmware image file. Authority Admin Syntax FIRMWARE INSTALL HP StorageWorks 2/8q Fibre Channel Switch Management User Guide 123