HP StorageWorks MSA1000 HP StorageWorks 2/8q Fibre Channel Switch Management V - Page 121
the file to the workstation, The following is an example of how to create a backup file
View all HP StorageWorks MSA1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Command Line Interface 2/8q FC Switch (admin-config) #> config cancel Configuration mode will be canceled. Please confirm (y/n): [n] y 2/8q FC Switch (admin) #> admin end The following is an example of how to create a backup file (configdata) and download the file to the workstation: 2/8q FC Switch #> admin start 2/8q FC Switch (admin) #> config backup 2/8q FC Switch (admin) #> admin end 2/8q FC Switch #> exit #>ftp symbolic_name or ip_address user: images password: images ftp> bin ftp> get configdata ftp> quit The following is an example of how to upload a configuration backup file (configdata) from the workstation to the switch, and then restore the configuration: #> ftp symbolic_name or ip_address user: images password: images ftp> bin ftp> put configdata ftp> quit 2/8q FC Switch #> admin start 2/8q FC Switch (admin) #> config restore The switch will be reset after restoring the configuration. Please confirm (y/n): [n] y Alarm Msg: [Tue Jun 10 09:25:56.938 2003][A1005.0021][SM][Configuration is being restored - this could take several minutes !] Alarm Msg: [Tue Jun 10 09:26:19.266 2003][A1000.000A][SM][The switch will be reset in 3 seconds due to a config restore] 2/8q FC Switch (admin) #> Alarm Msg: [Tue Jun 10 09:26:22.296 2003][A1000.0005][SM][The switch is being reset] Good bye. HP StorageWorks 2/8q Fibre Channel Switch Management User Guide 121