HP StorageWorks MSA1000 HP StorageWorks 2/8q Fibre Channel Switch Management V - Page 124
Hardreset command, Set Log Command
View all HP StorageWorks MSA1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Command Line Interface Examples 2/8q FC Switch (admin) #> firmware install Warning: Installing new firmware requires a switch reset. Continuing with this action will terminate all management sessions, including any Telnet sessions. When the firmware activation is complete, you may log in to the switch again. Do you want to continue? [y/n]: y Press 'q' and the ENTER key to abort this command. User Account : johndoe IP Address : 10.20.33.130 Source Filename : 4.0.3.04.00_mpc About to install image. Do you want to continue? [y/n] y Connected to 10.20.33.130 (10.20.33.130). 220 localhost.localdomain FTP server (Version wu-2.6.1-18) ready. 331 Password required for johndoe. Password: xxxxxxxxx 230 User johndoe logged in. bin 200 Type set to I. verbose Verbose mode off. This may take several seconds... The switch will now reset. Connection closed by foreign host. Hardreset command Resets the switch and performs a power-on self test. This reset disrupts traffic, activates the pending firmware, and clears the alarm log. To save the alarm log before resetting, refer to the "Set Log Command" on page 144. Authority Admin Syntax HARDRESET Notes To reset the switch without a power-on self test, refer to the "Reset command" on page 131. 124 HP StorageWorks 2/8q Fibre Channel Switch Management User Guide