HP StorageWorks MSA1000 HP StorageWorks 2/8q Fibre Channel Switch Management V - Page 55
Add Zone Members, Edit > Create Members, Apply, Zoning > Edit Zoning., Domain Port, FC Address
View all HP StorageWorks MSA1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Switch Manager Adding zone members Adding a zone member to a zone affects every zone set in which that zone is a member. To add member ports/devices to a zone, do one of the following: ■ Select a port by port number, Fibre Channel address, or World Wide Name in the Port/Device tree, and drag it into the zone. To select and drag multiple ports/devices, press and hold Ctrl while dragging. ■ Select one or more ports by port number, Fibre Channel address, or World Wide Name in the Port/Device tree. Right-click the zone and then select Add Zone Members from the menu. ■ Select Edit > Create Members. Choose the WWN, Domain/Port, or First Port Address option and enter the port hex value. Click Apply to save changes to the zoning database. Note: Domain ID conflicts can result in automatic reassignment of switch domain IDs. These reassignments are not reflected in zones that use domain ID/port number pair to define their membership. Be sure to reconfigure zones that are affected by a domain ID change. Creating a member The Create a Member dialog box allows you to add a member to a zone or alias that can not be added using the drag/drop method. 1. Select Zoning > Edit Zoning. The Edit Zoning dialog box is displayed (Figure 17). 2. Select the zone or alias in the left pane in which to add a member. 3. Select Edit > Create Members. The Create a Member dialog box is displayed. 4. Click WWN, Domain Port, or FC Address. 5. Enter the hexadecimal value for the new zone member. Enter 16 digits for a WWN member, 4 digits for a Domain Port member (DDPP), or 6 digits for an FC Address member (DDPPAA - D=Domain ID, P=PortNumber, A=ALPA). 6. Click OK. Renaming a zone or a zone set 1. Select Zoning > Edit Zoning. The Edit Zoning dialog box is displayed (Figure 17). 2. Select the zone/zone set to be renamed in the Zone Sets tree. 3. Select Edit > Rename. The Rename Zone/Rename Zone Set dialog box is displayed. 4. Enter a new name for the zone/zone set. 5. Click OK. Removing a zone member Removing a zone member affects every zone and zone set in which that zone is a member. 1. Select Zoning > Edit Zoning. The Edit Zoning dialog box is displayed (Figure 17). 2. Select the zone member to be removed. 3. Select Edit > Remove. 4. Click OK. HP StorageWorks 2/8q Fibre Channel Switch Management User Guide 55