HP StorageWorks MSA1000 HP StorageWorks 2/8q Fibre Channel Switch Management V - Page 84
Port Information data window, Port Info
View all HP StorageWorks MSA1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Switch Manager Port Information data window The Port Information data window displays port detail information for the selected port. To open the Port Information data window, click the Port Info tab below the data window in the faceplate display. Table 24 describes the Port Information data window entries. Table 24: Port Information data window entries Entry Port Address Administrative Port Type Operational Port Type Administrative Port State Operational Port State Configured Administrative Port State Logged In MFS Mode I/O Stream Guard Administrative Port Speed Operational Port Speed Interop Credits Device Scan Symbolic Name Ext Credits Requested Credits to Donate Donor Group Valid Donor Groups Medium Description Port Fibre Channel address. The port type (G, GL, F, FL, or Donor) that the port is configured as. This value is persistent; it is maintained during a switch reset. During a port auto-configuration it is used to determine which operational port states are allowed. The port type that is currently active. This is set during port auto-configuration based on the administrative port type. The port state (Online, Offline, Diagnostics, or Down) which has been set by the user. This state may be different from the configured administrative state if the user has not saved it in the switch configuration. This state is used at the time it is set to try to set the port operational state. This value is not persistent and is lost on a switch reset. The port state that is currently active. This value may be different from the administrative port state, for example due to an error condition. The port state (Online, Offline, Diagnostics, or Down) which is saved in the switch configuration, either by the user or at the factory. This value is persistent; it is maintained during a switch reset, and is used after a reset to set the port operational state. Indicates whether logged in or not. Port tuning indicator. Whether RSCN suppression is enabled or disabled. The speed requested by the user. The speed actually being used by the port. Whether Interop credits have been set. (not supported) Queries the connected device during login for FC-4 descriptor information. Disable this parameter only if the scan creates a conflict with the connected device. Port symbolic name. Whether extended credits have been requested for ports. The number of credits available to be donated by the selected port. The donor group of the selected port. The number of separate groups within which extended credits may be donated and assigned. The transceiver type. 84 HP StorageWorks 2/8q Fibre Channel Switch Management User Guide