HP StorageWorks MSA1000 HP StorageWorks 2/8q Fibre Channel Switch Management V - Page 149
Enables True or disables False the Network Time Protocol, Examples, Table 56
View all HP StorageWorks MSA1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
Command Line Interface Table 56: System configuration settings (Continued) Entry RemoteLogHostAddress NTPClientEnabled NTPServerAddress Description The IP address of the host that will receive the switch event log information if remote logging is enabled. The default is 10.0.0.254. Enables (True) or disables (False) the Network Time Protocol (NTP) client on the switch. This client enables the switch to synchronize its time with an NTP server. This feature supports NTP version 4 and is compatible with version 3. An Ethernet connection to the server is required and you must first set an initial time and date on the switch. The synchronized time becomes effective immediately. The default is False. The IP address of the NTP server from which the NTP client acquires the time and date. The default is 10.0.0.254. Examples The following is an example of the Set Setup SNMP command: 2/8q FC Switch #> admin start 2/8q FC Switch (admin) #> set setup snmp A list of attributes with formatting and current values will follow. Enter a new value or simply press the ENTER key to accept the current value. If you wish to terminate this process before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so. Trap Severity Options unknown, emergency, alert, critical, error, warning, notify, info, debug, mark SNMPEnabled Contact Location Trap1Address Trap1Port Trap1Severity Trap1Version Trap1Enabled Trap2Address Trap2Port Trap2Severity Trap2Version Trap2Enabled Trap3Address Trap3Port Trap3Severity Trap3Version Trap3Enabled Trap4Address Trap4Port Trap4Severity Trap4Version Trap4Enabled (True / False) [True ] (string, max=64 chars) [