Home » HP Manuals » Storage Devices » HP StorageWorks MSA1000 » Manual Viewer

HP StorageWorks MSA1000 HP StorageWorks 2/8q Fibre Channel Switch Management V - Page 132

Table 45, Set Log, Command, Hardreset command, Activates the pending firmware.

View all HP StorageWorks MSA1000 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 132 highlights

Command Line Interface Keywords CONFIG [CONFIG_NAME] Resets the configuration given by [config_name] to the factory default values for switch, port, port threshold alarm, and zoning configuration. If [config_name] does not exist on the switch, a configuration with that name is created. If you omit [config_name], the active configuration is reset. You must activate the configuration for the changes to take effect. See Table 45 through Table 47 for switch, port, and port threshold alarm configuration default values. FACTORY Resets switch configuration, port configuration, port threshold alarm configuration, zoning configuration, SNMP configuration, system configuration, and zoning to the factory default values. The switch configuration is activated automatically. See Table 45 through Table 50. Note: Because this keyword changes network parameters, the workstation could lose communication with the switch and release the Admin session. PORT [PORT_NUMBER] Reinitializes the port given by [port_number]. Ports are numbered beginning with 0. SNMP Resets the SNMP configuration settings to the factory default values. See Table 49 for SNMP configuration default values. SWITCH Resets the switch without a power-on self test. This is the default. This reset disrupts traffic and does the following: - Activates the pending firmware. - Closes all management sessions. - Clears the alarm log. To save the alarm log before resetting, refer to the "Set Log Command" on page 144. To reset the switch with a power-on self test, refer to the "Hardreset command" on page 124. SYSTEM Resets the system configuration settings to the factory default values. See Table 50 for system configuration default values. Note: Because this keyword changes network parameters, the workstation could lose communication with the switch. ZONING Clears the zoning database and deactivates the active zone set. The zoning configuration values (autosave, default visibility) remain unchanged. 132 HP StorageWorks 2/8q Fibre Channel Switch Management User Guide

Section	Page
2/8q FC Switch Management User Guide	1
Contents	3
About This Guide	13
Overview	14
Intended audience	14
Related documentation	14
Conventions	15
Document conventions	15
Text symbols	15
Equipment symbols	16
Getting help	17
HP installation and configuration assistance	17
HP technical support	18
HP storage web site	18
HP authorized reseller	18
1-Switch Manager	19
Getting started	20
Installing Switch Manager	20
Installing Switch Manager on Windows systems	20
Installing Switch Manager on Linux systems	21
Starting Switch Manager	21
Exiting Switch Manager	22
Removing Switch Manager	23
Removing Switch Manager from Windows	23
Removing Switch Manager from Linux	23
Changing the encryption key for the default fabric view file	23
Saving and opening fabric view files	23
Setting Switch Manager preferences	24
Using online help	25
Viewing software version and copyright information	25
Using the Switch Manager user interface	25
Menu bars	26
Tool bar	29
Fabric tree	29
Graphic window	30
Data window and tabs	31
Working status indicator	31
Using the topology display	31
Using the faceplate display	33
Managing fabrics	35
Managing fabric security	35
User account security	35
Fabric services	36
Managing the fabric database	36
Adding a fabric	36
Removing a fabric	37
Opening a fabric view file	37
Saving a fabric view file	38
Rediscovering a fabric	38
Adding a new switch to a fabric	38
Replacing a failed switch	39
Deleting switches and links	39
Displaying fabric information	40
Fabric status	40
Event Browser	41
Active Zoneset data window	44
Zoning a fabric	45
Zoning concepts	45
Using the Zoning Config dialog box	48
Restoring default zoning	48
Merging fabrics and zoning	49
Using the Edit Zoning dialog box	49
Managing zone sets	52
Managing zones	54
Managing aliases	56
Saving the Zoning Database to a File	57
Managing switches	58
Managing user accounts	58
Creating user accounts	59
Removing a user account	59
Changing a user account password	60
Modifying a user account	61
Displaying switch information	62
Name Server data window	63
Switch data window	63
Link data window	64
Port Statistics data window	64
Port Information data window	65
Configured Zonesets data windows	65
Configuring port threshold alarms	66
Exporting name server information to a file	67
Paging a switch	67
Setting the date/time and NTP client	68
Resetting a switch	68
Configuring a switch	68
Configuration wizard	69
Switch properties	69
Network properties	72
Archiving a switch configuration	75
Restoring a switch configuration	75
Restoring the factory default configuration	77
Downloading a support file	78
Installing firmware	78
Displaying hardware status	79
Managing ports	80
Displaying port information	80
Port status	80
Port Statistics data window	82
Port Information data window	84
Name Server data window	85
Configuring ports	85
Port States parameters	86
Port Speed parameters	86
Port Type parameters	87
Interoperability Credits parameters	87
I/O Stream Guard parameters	87
Device Scan parameter	87
Changing the port symbolic name	87
Extending port credits	88
Resetting a port	89
Testing ports	89
Graphing port performance	91
Starting HP StorageWorks Fabric View	91
Exiting HP StorageWorks Fabric View	92
Saving and opening Fabric View files	92
Changing the Default Fabric View File encryption key	93
Setting HP StorageWorks Fabric View preferences	93
Setting the polling frequency	93
Displaying graphs	94
Removing graphs	94
Arranging graphs in the display	94
Customizing graphs	94
Printing graphs	96
Rescaling a selected graph	96
Saving graph statistics to a file	96
Interpreting Switch Manager messages	97
Fabrics File-Open, Save messages	97
Add a Fabric messages	97
Network Properties dialog box messages	98
Switch Properties dialog box messages	99
Port Properties dialog box messages	101
Faceplate display messages	102
Load Firmware dialog box messages	104
Port Loopback Test dialog box messages	104
Extended Credits wizard messages	106
Zoning dialog box messages	106
Restore Configuration dialog box messages	108
Save Fabric View dialog box messages	108
Trap Configuration dialog box messages	109
2-Command Line Interface	111
Logging on to a switch	112
Working with user accounts	112
Working with switch configurations	113
Modifying a configuration	113
Backing up a switch configuration	114
Restoring a switch configuration	115
Commands	116
Admin command	117
Alias command	118
Config command	119
Create Support command	122
Date command	123
Firmware Install command	123
Hardreset command	124
Help command	125
History command	126
Hotreset command	126
Image command	127
Lip command	129
Passwd command	129
Ping command	130
Ps command	130
Quit command	131
Reset command	131
Set command	135
Set Config command	137
Set Log Command	144
Set Port command	146
Set Setup command	147
Show command	150
Show Config command	160
Show Log command	163
Show Perf command	165
Show Setup command	166
Shutdown command	169
Test command	169
Uptime command	171
User command	171
Whoami command	173
Zone Command	174
Zoneset command	176
Zoning command	178

Match case Limit results 1 per page

Command Line Interface

132

HP StorageWorks 2/8q Fibre Channel Switch Management User Guide

Keywords

CONFIG

[CONFIG_NAME]

Resets the configuration given by [config_name] to the factory default values for

switch, port, port threshold alarm, and zoning configuration. If [config_name] does

not exist on the switch, a configuration with that name is created. If you omit

[config_name], the active configuration is reset. You must activate the configuration

for the changes to take effect. See

Table 45

through

Table 47

for switch, port, and port

threshold alarm configuration default values.

FACTORY

Resets switch configuration, port configuration, port threshold alarm configuration,

zoning configuration, SNMP configuration, system configuration, and zoning to the

factory default values. The switch configuration is activated automatically. See

Table 45

through

Table 50

Note:

Because this keyword changes network parameters, the workstation could lose

communication with the switch and release the Admin session.

PORT [PORT_NUMBER]

Reinitializes the port given by [port_number]. Ports are numbered beginning with 0.

SNMP

Resets the SNMP configuration settings to the factory default values. See

Table 49

for

SNMP configuration default values.

SWITCH

Resets the switch without a power-on self test. This is the default. This reset disrupts

traffic and does the following:

—

Activates the pending firmware.

—

Closes all management sessions.

—

Clears the alarm log. To save the alarm log before resetting, refer to the “

Set Log

Command

” on page 144.

To reset the switch with a power-on self test, refer to the “

Hardreset command

” on

page 124.

SYSTEM

Resets the system configuration settings to the factory default values. See

Table 50

for

system configuration default values.

Note:

Because this keyword changes network parameters, the workstation could lose

communication with the switch.

ZONING

Clears the zoning database and deactivates the active zone set. The zoning

configuration values (autosave, default visibility) remain unchanged.