HP StorageWorks MSA1000 HP StorageWorks 2/8q Fibre Channel Switch Management V - Page 129
Lip command, Passwd command
View all HP StorageWorks MSA1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Command Line Interface 13. A message prompts you to reset the switch to activate the firmware. Enter the hotreset command to perform a non-disruptive firmware activation. 2/8q FC Switch (admin) $>hotreset Lip command Reinitializes the specified loop port. Authority Admin Syntax LIP [PORT_NUMBER] Keywords [PORT_NUMBER] The number of the port to be reinitialized. Examples 2/8q FC Switch (admin) #> lip 2 Passwd command Changes a user account's password. Authority Admin account name and an admin session to change another account's password; you can change you own password without an Admin session. Syntax PASSWD [ACCOUNT_NAME] Keywords [ACCOUNT_NAME] The user account name. To change the password for an account name other than your own, you must open an admin session with the account name Admin. If you omit [account_name], you are prompted to change the password for the current account name. Examples 2/8q FC Switch (admin) #> passwd user2 Press 'q' and the ENTER key to abort this command. account OLD password : ******** account NEW password (4-20 chars) : ******** please confirm account NEW password: ******** password has been changed. HP StorageWorks 2/8q Fibre Channel Switch Management User Guide 129