HP StorageWorks MSA1000 HP StorageWorks 2/8q Fibre Channel Switch Management V - Page 175

Command Line Interface REMOVE [zone] [member_list] Removes the ports/devices given by [member_list] from the zone given by [zone]. Use a to delimit aliases and ports/devices in [member_list]. [member_list] can have any of the following formats: - Domain ID and port number pair (Domain ID, Port Number). Domain IDs can be 1-239; port numbers can be 0-255. - 6-character hexadecimal device Fibre Channel address (hex) - 16-character hexadecimal worldwide port name (WWPN) with the format xx:xx:xx:xx:xx:xx:xx:xx. - Alias name RENAME [zone_old] [zone_new] Renames the zone given by [zone_old] to the zone given by [zone_new]. TYPE [zone] [zone_type] Specifies the zone type given by [zone_type] to be assigned to the zone name given by [zone]. If you omit the [zone_type], the system displays the zone type for the zone given by [zone]. [zone_type] can be one of the following: soft-name server zone hardACL-Access control list hard zone. This keyword is case sensitive. ZONESETS [zone] Displays all zone sets of which the zone given by [zone] is a component. This keyword does not require an Admin session. Examples The following is an example of the Zone List command: 2/8q FC Switch #> zone list Zone ZoneSet wwn_b0241f zone_set_1 wwn_23bd31 zone_set_1 wwn_221416 zone_set_1 wwn_2215c3 zone_set_1 wwn_0160ed zone_set_1 HP StorageWorks 2/8q Fibre Channel Switch Management User Guide 175