HP StorageWorks MSA1000 HP StorageWorks 2/8q Fibre Channel Switch Management V - Page 171
Uptime command, User command, session, from which all commands can be entered. Without Admin authority
View all HP StorageWorks MSA1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 171 highlights
Command Line Interface Uptime command Displays the elapsed up time since the switch was last reset and reset method. A hot reset or non-disruptive firmware activation does not reset the elapsed up time reported by this command. Authority None Syntax UPTIME Examples 2/8q FC Switch #> uptime Elapsed up time : 0 day(s), 2 hour(s), 28 min(s), 44 sec(s) Reason last reset: NormalReset User command Administers and displays user accounts. Authority Admin, except for the List option. Syntax USER Keywords ACCOUNTS Displays all user accounts that exist on the switch. This keyword is available to all account names without an Admin session. ADD Add a user account to the switch. You will be prompted for an account name, a password, authority, and an expiration date. - A switch can have a maximum of 15 user accounts. - Account names are limited to 15 characters; passwords must be 4-20 characters. - Admin authority grants permission to use the Admin command to open an admin session, from which all commands can be entered. Without Admin authority, you are limited to view-only commands. - The expiration date is expressed in the number of days until the account expires (2000 maximum). The switch will issue an expiration alarm every day for seven days prior to expiration. 0 (zero) specifies that the account has no expiration date. DELETE [account_name] Deletes the account name given by [account_name] from the switch. HP StorageWorks 2/8q Fibre Channel Switch Management User Guide 171