HP StorageWorks MSA1000 HP StorageWorks 2/8q Fibre Channel Switch Management V - Page 142
SET CONFIG SWITCH, The following is an example of the, command
View all HP StorageWorks MSA1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
Command Line Interface ExtCredit (dec value, increments of 15, non-loop only) FANEnable (True / False) LCFEnable (True / False) MFSEnable (True / False) MSEnable (True / False) NoClose (True / False) IOStreamGuard (Enable / Disable) VIEnable (True / False) PDISCPingEnable (True / False) [0 ] [True ] [False ] [False ] [True ] [False ] [Disable] [False ] [True ] Finished configuring attributes. This configuration must be saved (see config save command) and activated (see config activate command) before it can take effect. To discard this configuration use the config cancel command. 2/8q FC Switch (admin-config) #> The following is an example of the SET CONFIG SWITCH command: 2/8q FC Switch #> admin start 2/8q FC Switch (admin) #> config edit 2/8q FC Switch (admin-config) #> set config switch A list of attributes with formatting and default values will follow. Enter a new value or simply press the ENTER key to accept the current value. If you wish to terminate this process before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so. AdminState (1=Online, 2=Offline, 3=Diagnostics) [Online ] BroadcastEnable (True / False) [False ] InbandEnabled (True / False) [False ] DefaultDomainID (decimal value, 1-239) [11 ] DomainIDLock (True / False) [True ] SymbolicName (string, max=32 chars) [2/8q FC Switch] R_A_TOV (decimal value, 100-100000 msec) [10000 ] E_D_TOV (decimal value, 10-20000 msec) [2000 ] PrincipalPriority (decimal value, 1-255) ConfigDescription (string, max=32 chars) [254 ] [2/8q FC Switch] InteropMode (True / False) [True ] 142 HP StorageWorks 2/8q Fibre Channel Switch Management User Guide