Hitachi DZ-MV730A Owners Guide - Page 165
Use AC adapter
UPC - 050585223547
View all Hitachi DZ-MV730A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
Message Cause & Troubleshooting There was no scene which can be deleted. This message will appear if you try to delete multiple scenes on Disc Navigation when all the selected scenes have been locked. Release the lock on scenes before executing deletion. This card cannot be used. Please replace card. The card cannot be used in this DVD video camera/recorder: Use another card. This disc cannot be used. Please replace disc. A disc that cannot be used on this DVD video camera/recorder has been loaded. Check the type of disc. This disc is recorded by This DVD video camera/recorder can use only discs recorded on the PAL system. Please the NTSC system. A disc recorded on the PAL system cannot be replace disc. used on this DVD video camera/recorder. Top scene cannot be divided. Division is not possible at the start of scene. UNFORMAT DISC The disc is not initialized or it is damaged. If this message appears, be sure to initialize the disc on this DVD video camera/recorder before using it. Reinitializing even a disc used on this DVD video camera/ recorder may be necessary (initializing will erase all recorded contents on disc). If this message appears, try to initialize the disc. If the same message still appears, the disc may be damaged: Use another disc. See *2 on page 166. Use AC adapter/ charger. Finalization is not possible when the DVD video camera/recorder is powered by a battery: Use the AC adapter/charger for finalization. Use AC adapter/ charger. Turn off power. Scene cannot be repaired when the DVD video camera/recorder is powered by a battery. If the AC adapter/charger is unavailable in handy place, remove the disc, use the opposite side, or use another disc. To repair the removed disc, insert the disc into the DVD video camera/recorder afterwards, and connect the AC adapter/charger. VIDEO scene cannot be No movie can be copied to card. copied to card. Select stills and copy them to card. Write protected. Check card. A card with the erase prevention switch locked is inserted: Unlock the switch. Write protected. Check disc. • A write-protected disc is inserted. • Release the write-protect using the Disc Navigation menu. Reference page 110, 118 27 25 112 132 26 43, 135 43 117 27 133 English 165