Hitachi DZ-MV730A Owners Guide - Page 47

REMOVING DISC 1 Press down the DISC EJECT button once and release it. In a moment, the cover of disc insertion block will open. DISC EJECT If the DVD video camera/recorder is on at this time, the "EJECT" indicator will blink on the LCD monitor or in the viewfinder. 2 Gently open the cover fully until it stops. Note: • Do not remove the battery or disconnect the AC adapter/charger during removal of the disc or until power is completely turned off: If you do, the disc cover will not open. If this happens, reattach the battery or AC adapter/charger, push down the DISC EJECT button once, and then release it. • Do not insert anything other than the 8 cm DVD-RAM or DVD-R disc into the disc insertion block: Doing so could cause malfunctions. • When inserting or removing the disc, BE SURE NOT to look into the lens in laser pickup: Doing so could damage your eyesight. • If the battery remaining level runs out, set the power switch to "OFF" to remove the disc (see page 42). 3 Remove the disc. While pushing down the center portion of turntable, pick up the disc, holding its edge, to remove it. Turntable 4 Gently push the section indicated "PUSH CLOSE" on the cover of disc insertion block, to close the cover. English 47