Hitachi DZ-MV730A Owners Guide - Page 171
When the DVD video camera/recorder is connected to PC - usb cable
UPC - 050585223547
View all Hitachi DZ-MV730A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 171 highlights
When the DVD video camera/recorder is connected to PC: Symptom Cause and Correction No drive icon appears The DVD video camera/recorder is not turned on. on PC. Check the power supply. Turn PC off and then disconnect the PC connection cable. Turn PC on again, and then use the PC connection cable to connect the DVD video camera/recorder to PC. Make sure the PC connection cable is completely plugged into this DVD video camera/recorder. Error occurs in playback If error occurs with USB connection, the transfer rate is not of DVD video camera/ sufficient. It is recommended that you use a USB terminal recorder on PC. conforming to USB2.0 when connecting the DVD video camera/ recorder. Application is not normally run on PC. Turn the PC and DVD video camera/recorder off, and try again. Error occurs during writing to disc. The temperature of DVD video camera/recorder is too high due to continuous operation. Disconnect the DVD video camera/recorder from PC once, remove the disc from the DVD video camera/recorder, and then turn it off. After a few moments, connect them again and write to a brand-new disc. Transfer of images stops. Connect the DVD video camera/recorder to another USB terminal of PC. If your PC is a desktop type, it is recommended that you use USB terminal on the back of PC. If you are using USB2.0 extended card, it is also recommended that you install the newest version driver provided by each USB2.0 card maker. DVD-RAM/R drive built into PC cannot be used after the provided software has been installed. This problem may be solved if the software related to DVD-RAM/ R/RW of your PC is upgraded, or if the UDF driver is uninstalled. However, with Windows® Me / 2000 Professional, uninstalling the UDF driver will make it impossible for the JPEG stills recorded on DVD-RAM of this DVD video camera/recorder to be read by the PC. DVD-R disc cannot be played back on DVDMovieAlbumSE. DVD-MovieAlbumSE does not support playback or data read on DVD-R disc: Use generally available DVD video playback software to play back DVD-R disc on PC. Error appears when starting DVDMovieAlbumSE. Make sure that your PC display adapter (video card) conforms to DirectX8.1. Video written to hard disk of PC cannot be edited on DVDMovieAlbum copy tool. DVD-MovieAlbumSE cannot edit DVD-VR data stored on hard disk of PC: Copy the data to another DVD-RAM disc and then edit it. Movies are not recognized by application in PC. Make sure the power switch of this DVD video camera/recorder is set to "O" or "N". Reference page 44 141 143 141 English 171