Hitachi DZ-MV730A Owners Guide - Page 46
When using brand-new DVD-R disc - finalize disc
UPC - 050585223547
View all Hitachi DZ-MV730A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Note: • If the cover of disc insertion block is open, the ACCESS/PC indicator will blink when an image is displayed on the LCD monitor screen: In this case, the DVD video camera/recorder will not turn off even if the power switch is set to "OFF". If the cover remains open after a while, the DVD video camera/recorder will automatically turn off. • Disc cannot be inserted or removed unless a charged battery or AC adapter/charger is connected to the DVD video camera/recorder. • If a discharged battery is used, the disc cannot be inserted or removed: Connect a charged battery or AC adapter/charger to the DVD video camera/ recorder. • If there is some delay before recording starts, refer to "Check 4" on page 158. • If the disc is not correctly attached to the turntable, it will be difficult to close the cover: If this happens, do not forcibly close the cover (this could cause a fault), but re-attach the disc to the turntable correctly. • If a single-sided disc is inserted into DVD video camera/recorder with the printed label facing the inside, an error message will appear. Remove the disc and reinsert it with its recording side facing the inside. See "Trouble Messages" on page 160. • When using double-sided disc Recording is possible on both sides of double-sided disc. However, when recording or playback on one side is finished, recording or playback will not move automatically to the other side. Remove the disc once from the DVD video camera/recorder, turn over the disc and insert it again for continued use. The recording surfaces of double-sided disc are likely to become dirtied or scratched: Always make sure that there is no dirt or scratch on the recording surface facing the pickup lens, and then use the disc taking great care that it is not dirtied or scratched. Use the provided disc cleaning cloth to wipe off any dirt on disc (see page 26). ●When using brand-new DVD-R disc Recognition of the disc will start. The messages on the right will appear in sequence by pressing the A button between messages. F o rma t D i s c Disc is not formatted. If it formats, it becomes possible to use for camera. NEXT CANCEL When recording on this DVD video camera/recorder: When final message "Format the disc now?" F o rma t D i s c appears, choose "YES" and then press the A button. The disc will be formatted. Howe ve r , when you r e c o r d f r om PC connec t i on terminal, please do not format. NEXT CANCEL When formatting is Not displayed on DZ- complete, "DVD-R disc, MV730A. Video mode and 16:9 mode cannot be changed" will appear (see page 163): Press the A button to erase the message. F o rma t D i s c Once formatted, a DVD-R Format the disc now? disc can no longer be YES NO changed to a disc for PC, ENTER even if it has not been recorded on this DVD video camera/recorder. Note: See page 91 for video mode. See page 92 for 16:9 mode. When recording data from PC (for DZGX20A or DZ-MV780A only): While the above messages are being displayed, press the C button, or when message "Format the disc now?" appears, choose "NO" and then press the A button. However, if data from PC has not yet been recorded, the disc can be made usable on this DVD video camera/recorder. When inserting the disc into this DVD video camera/recorder, the same message will appear: If you wish to use it on this DVD video camera/recorder, choose "YES". Note: Do not initialize a disc on which you wish to record data created using the application (DVDfunSTUDIO) of PC. English 46