IBM 2109 Service Guide - Page 48
Downloading firmware using a Microsoft® Windows NT operatingsystem, telnet, login, Password
UPC - 087944519355
View all IBM 2109 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
telnet [switch IP address] 3. Login using the admin userid. For example: login: admin 4. Enter the password at the prompt. For example: Password: password Respond to the password prompt with the current switch password. The switch ships with a default password of "password". 5. Type the following command: firmwareDownload ["host name/IP address"], ["user name"], ["filename"] For example: firmwareDownload "192.111.2.1", "timm", "/tmp/os/v2.0.1a_0621" Note: The host name is the host name or the host IP address. The username is a valid host username. The file name is a path to the new firmware file. The RSH server validates the username and delivers the file to the switch where it is stored in flash memory. 6. Restart the switch to initiate the new firmware. Downloading firmware using a Microsoft® Windows NT operating system Perform this procedure to download firmware using Windows NT. 1. Download the firmware from the Web site at: www.ibm.com/storage/fcswitch Remember the directory name where you save the code. Download the two utilities (rshd.exe and cat.exe) from the Web site. Download these into the same directory as the firmware. 2. In a DOS window, enter: rshd [to execute the RSH daemon]. 3. Go to "Downloading firmware from a UNIX® host" on page 31 and perform steps 2 through 6. Note: When downloading to a switch with the firmwareDownload command, you must use UNIX directory (forward slash /) addressing for the directory location in the command, not PC (backward slash \) directory addressing. For example, from Windows NT the firmwareDownload command would be: firmwareDownload "192.111.2.1", "timm", "/tmp/os/v2.0.1a_0621" . 32 IBM SAN Fibre Channel Switch: 2109 Model S16 Installation and Service Guide