IBM 8671 Hardware Maintenance Manual - Page 132
Installation
![]() |
UPC - 087944734307
View all IBM 8671 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
DASD backplane Complete the following steps to remove the DASD backplane. Note: v Read "Installation guidelines" on page 45. v Read the safety notices at "Safety information" on page 169. v Read "Handling electrostatic discharge-sensitive devices" on page 172. 1. Turn off the server. 2. Disconnect all external cables and power cords from the back of the server. 3. Pull out the hard drives. 4. Remove the server cover (see "Removing the left-side cover" on page 55). 5. Remove the two front fans (see "Replacing a hot-swap fan" on page 94). 6. Disconnect and remove adapters and spacers (see "Working with adapters" on page 60). 7. Remove the two central fans (see "Replacing a hot-swap fan" on page 94). 8. Remove the plastic baffle. 9. Disconnect the DASD cable from the DASD backplane. 10. Press the release latches and pull the backplane out of the server. 11. To replace the DASD backplane, reverse the previous steps, making sure to place the backplane assembly over the two guide pins on the chassis floor. 122 xSeries 235 Type 8671: Hardware Maintenance Manual and Troubleshooting Guide
![](/manual_guide/products/ibm-8671-hardware-maintenance-manual-61e0001/132.png)