IBM 8671 Hardware Maintenance Manual - Page 62
static-sensitive
![]() |
UPC - 087944734307
View all IBM 8671 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Table 6 describes the function of each switch on the switch block. Table 6. Switches 1-8 Switch number Default value 8 Off 7 Off 6 Off Switch description 400 MHz system board - Reserved. 533 MHz system board - Disable Wake on LAN after ac power-on. Power-on override. When toggled to On, this switch forces the server to turn on, overriding the power-on button. Power-on password override. Changing the position of this switch bypasses the power-on password check the next time the server is turned on and starts the Configuration/Setup Utility program so that you can change or delete the power-on password. You do not need to move the switch back to the default position after the password is overridden. Changing the position of this switch does not affect the administrator password check if an administrator password is set. 5 Off 4 Off 3 Off 2 Off 1 Off See "Choices available from the Configuration/Setup main menu" on page 16 for additional information about the power-on password. Reserved. Reserved. Reserved. Reserved. Reserved. CAUTION: Before changing any switch settings or moving any jumpers, turn off the server; then, disconnect all power cords and external cables. (Review the information in "Installation guidelines" on page 45, "Handling static-sensitive devices" on page 46, and "Safety information" on page 169.) Note: Any system-board switch or jumper blocks that are not shown in the illustrations in this book are reserved. 52 xSeries 235 Type 8671: Hardware Maintenance Manual and Troubleshooting Guide
![](/manual_guide/products/ibm-8671-hardware-maintenance-manual-61e0001/62.png)