IBM 8671 Hardware Maintenance Manual - Page 68
Removing, bezel, installing, adapter-support, bracket
UPC - 087944734307
View all IBM 8671 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Removing the bezel The following illustration shows how to remove the bezel from a rack configuration server. Bezel-release lever Bezel Complete the following steps to remove the bezel: 1. Review the information in "Installation guidelines" on page 45, "Handling static-sensitive devices" on page 46, and "Safety information" on page 169. 2. Remove the server cover and locate the bezel-release lever. 3. Press the bezel-release lever to the unlocked position as indicated on the lever. 4. Pull the right side of the bezel away from the chassis; then, slide the bezel to the right to disengage the tabs. 5. Remove the bezel from the server and store the bezel in a safe place. Removing and installing the adapter-support bracket When working with some options, you must first remove the adapter-support bracket to access certain components or connectors on the system board. Note: The adapter-support bracket is attached to the center-fan bracket in the server. Both brackets are removed and installed together as a single unit. Complete the following steps to remove the adapter-support bracket: 1. Review the information in "Installation guidelines" on page 45, "Handling static-sensitive devices" on page 46, and "Safety information" on page 169. 58 xSeries 235 Type 8671: Hardware Maintenance Manual and Troubleshooting Guide